Netgear is a leading brand for wireless range extensions, once it come to enhance the existing router signal strength “Netgear wireless range extender” is a best choice. To do the installation and setup of these netgear wireless range extender is very easy and can be done with . Before discussing the netgear extender setup and installation process let’s talk about the available wireless range extenders. Netgear has designed different segments in wireless range extenders-WiFi Mesh ExtenderAC3000-Nighthawk X6S, Ac2200 NighthawkX4S Triband Extender, AC1900-Nighthawk WiFi range extender and AC1900 WiFi Mesh Extender. These are bestselling wireless range extenders by Netgear. In this blog we will understand the process of netgear wifi extender setup and netgear wifi extender setup for all these Netgear wireless range extenders. Before discussing the process of Netgear wifi extender set up understand the requirement of wireless range extension.

Features of Extender

Boost your Existing WiFi Signals

Most of the times we struggle with poor wireless connectivity at home or our workplace and due to this interruption in WiFi signal we are not capable to complete our day to day task smoothly. To improve such conditions we need a good “Wireless Range Extender” which can broaden the network coverage for better connectivity.

No More Dead Zones

Netgear Wireless range extenders are designed in such a way so that you can experience the fastest connectivity on all your devices. With netgear wifi extenders you can turn your no network zones in fun zones. Get the reliable connection and wide coverage for your all devices.

Dual Band and Triband Range Extender

Netgear is manufacturing the world’s best wireless range extenders with tri-band and dual band series. AC3000-Nighthawk X6S, Nighthawk X6 Triband and Ac2200 Nighthawk X4S are the best triband wireless range extenders which can provide speed up to 3 Gbps.  

With Netgear Tri-band Wireless range extenders you can enjoy all the advanced wifi router features that can easily build your own powerful wireless network .Now you have the flexibility to design our networks in 2.4 and 5GHz bands. Use your existing wifi router’s SSID to create a single network or use multiple SSIDs to create separate networks. These netgear tri band wireless range extenders can work on any wifi router and provide seamless coverage for gaming and streaming.

In dual band series Netgear has some best seller wireless range extenders-Netgear EX6200, EX6110 AC1200, AC1900 Nighthawk EX7000 and AC1200 WiFi Range Extender. Now you can optimize your existing wireless network and eliminate the dead zones with AC Wi-Fi technology. Dual band wireless range extenders can deliver fast wifi speed and best connectivity on each device. With MU-MIMO technology stream multiple devices at time. Some points for the Netgear dual band wireless range extenders-

  • With Dual band WiFi get speed up to 750Mbps
  • These extenders support new 802.11ac and b/g/n WiFi devices
  • Netgear Dual band extender contains external antennas for better performance
  • With Gigabit Ethernet Port you can connect a wired device like Blu-ray® player, game console, smart TV or streaming player with your wifi network.
  • Latest FastLane™ Technology can be used for both WiFi bands to get one super high speed connection which is ideal for HD streaming and gaming.
  • MU-MIMO technology is best  for simultaneously streaming to multiple devices

Now let’s look in to the process of Netgear wireless extender setup which will include the Netgear wifi extender set wizard and mywifiext new extender setup. Firstly we will discuss thesetup process for netgear extender.


Netgear Wifi Range Extender Set up

Process of Netgear wifi range extender setup is almost same for each extender. There are many ways to complete the netgear wireless range extender set up and do that you need to open mywifiext new extender setup. We need to know one more thing before starting the setup process that is the website for admin access which is . There are basically two methods to complete the set up process for Netgear wifi range extenders; first is wired setup and second is wireless set up.

Connect the NETGEAR Wireless Extender Manually

To connect the netgear wifi extender manually you have to follow the below given steps-If you have a NETGEAR WiFi Extender with an Ethernet port. This is also called as netgear range extender setup wizard.

  • Use your Laptop or computer to connect to NETGEAR WiFi Extender with Ethernet cable.
  • Now login to the web interface of your NETGEAR Wireless Extender using –
  • You will be asked to complete the process by adding a username and password. Use default login credentials which are: Username-admin and Password-password.
  • Always remember username and password is case sensitive.
  • After logged in go to Setup > Wireless Settings.
  • If the password is different as your router password then change it so it matches.
  • Now click “Apply”.
  • Now you reconnect your Wi-Fi devices to the NETGEAR WiFi Extender.

NETGEAR WiFi Extender Setup Without an Ethernet port-

To complete the setup without an Ethernet cable you need to follow the below given steps-

  • First reset your NETGEAR Wireless Extender back to its factory default settings.
  • To complete this process, press and hold the Factory Settings button for minimum 7 second.
  • Now connect via Wi-Fi to your NETGEAR WiFi range extender.
  • After the above now login to the web user interface of your Netgear WiFi extender using
  • Put default credentials on the prompted screen for login.
  • Follow the netgear wifi range extender setup wizard to setup your connection to your router.
  • Once the above step is done then reconnects your all Wi-Fi devices to your NETGEAR WiFi Extender.

Netgear Wireless Range Extender Set up WPS method-

Now let’s understand the process of netgear wifi extender setup WPS methods. If existing wifi network supports WPS then follow the below given steps if you want to setup your netgear extender using the WPS button.

  • Firstly press and hold the WPS button on our wifi Extender for minimum 5 seconds. Once the WPS LED in front is blinking pink then stop pressing the WPS button.
  • Now within 2 minutes, press the WPS button on your wifi router or access point. Wait for next 2 minutes while the range extender connects to your existing wifi network.
  • If step 2 is successful, then you will find solid green colour on your extender’s LED.
  • Make sure your 2.4 GHz band LED is also on if not then repeat the step 1 and 2.
  • If your wifi router supports the 5 GHz band then just repeat the above steps to connect the netgear range Extender to the 5 GHz band.

Once your range extender setup is complete then the extended network for each band will broadcast as “network name_2GEXT” and “network name_5GEXT”. Now you can connect to the range extender’s network by using same password as per your wifi router.

How to find the Extender WiFi Network Password?

One more important task while using the netgear wifi range extender is to find the extender wifi network password. To complete this task you need to follow the below given steps-

  • Use your computer or Laptop that’s connected to your netgear Wi-Fi Range Extender via Ethernet or any wireless connection.
  • Then open an Internet browser to complete the process.
  • In the address bar of your browser  type
  • Now log in by using your default Username and Password.
  • To complete the above step click on settings and select the “Wireless” tab.
  • Look for your WiFi Password. If it says it is same as existing wifi network password then it is using the same WiFi password as your main WiFi router.
  • In case, if it asks to use a different password then you will get the type of password under Security Type and the Network Key.

How do I set up my Netgear n300 extender?

If you want to boost the existing wireless signal to eliminate those places where you have a weak signal or completely zero signal. The Netgear WN3000RPv3 range extender has a best WPS feature which helps you to easily connect to all wifi devices with the WPS method without typing the wifi password or asking to run the netgear range extender setup wizard.

Set up process for N300 Wireless Range Extender using the WPS button

Follow the step-by-step procedure for how do I set up my Netgear N300 extender?

  • Firstly place the extender in the same room where your WiFi Router is placed.
  • Now make sure internet connection is on from the main router. Also, make sure that the existing router is WPS enabled.
  • Plug your range extender into an electrical socket and wait till the Power LED to become solid. If it does not turn solid then press the On/Off button on the side panel of your netgear range extender.
  • Now press and hold the WPS button for about 2 seconds on the side panel of the wifi range extender. Check extender’s WPS LED will start to blink.
  • Next you need to Press the WPS button on your wifi router.
  • Now move the extender to your desired location and make sure it is in the appropriate place between the router and the wireless to deliver the best wifi signals.
  • Now connect all wifi devices to the Extender’s new SSID address. The extender’s wireless network name (SSID) changed to your existing WiFi network name with network name_2GEXT” and “network name_5GEXT”. Use the same password as you use for your wifi router.

With above defined steps you are now able to access best wireless connectivity with your Netgear n300 wifi range extender. This is the simplest setup for netgearn300 extender.

Netgear range extender set up with Genie App

Netgear genie wifi setup is an easy process and can be used for WN3500RP / WN2500RPv2 Netgear WiFi Range Extender. Once you complete this process then your netgear range extender will be configured to connect with your existing wireless network and also complete the setup of your extended wifi network. Follow the below given steps and keep your extender in the same room where you have installed your wifi router.

  • First you need to put your extender on power on mode and wait till LED turns green.
  • Now look and connect your computer with any of the wireless network-Netgear_EXT (SSID) which is default network for your extender.
  • Once you are through with second step then open a web browser on the same PC and it will take you to the Netgear Genie Setup. You can always access the Netgear Extender settings by connecting with the Extender and typing .
  • Now netgear genie will search a best existing wireless network. Once the search is over the list of existing network will be displayed on your screen. Select and press Continue.
  • In next step enter your passphrase or router key and then click on Continue.
  • Select the supported band and click on the Continue.
  • Once the extender initializes the connection with existing router it will show wireless setting of your netgear extender. Now again click on Continue to complete the set up process.
  • After few minutes apply settings screen will be displayed on your PC and your computer will be disconnected automatically.
  • Choose the extender network with your WIFI computer or device.
  • Check the option for connected devices on extender network.
  • Click on Finish and close the setup page.

Netgear Wifi Extender Setup Ex2700-

Here we will show the step-by-step process on how to install the Netgear EX2700 N300 Wireless Range Extender by using the NETGEAR Genie app? Though there are some other methods which can also be used for the Netgear wifi extender setup ex2700. Follow the below given steps for the set up throughNetgear Genie App.

  • First you need to place the ex2700 extender in the same room as the wireless router.
  • Now make sure you have good internet connectivity.
  • Then plug the netgear extender into an electrical socket and wait for the Power LED to blink.
  • If LED does not turn ON then you need to press the On/Off button on the side panel of your extender.
  • Now connect a wired PC or any wireless device that has an access of browser (wireless computers, smart phones, and tablets) to the netgear EX2700.
    • If you are using a wired connection then connect an Ethernet cable on the LAN port of the EXT.
    • If you have a wireless connection then look for the wireless network name, NETGEAR_EXT.
  • Now launch a web browser which will take you to NETGEAR genie to help with the installation process.
  • If you do not see NETGEAR genie when you open a browser, then type   or use
  • Now need to fill a User Name and Password. Use the default admin for the User Name and password for Password. Click on the continue button once you are done with the login process.
  • Now wait for till  NETGEAR genie is scanning your WiFi network
  • This will show the currently available wifi networks within the range of the Extender now select your network and then click on Continue.
  • Once you have completed the above step then type in the password of your main wireless network and click on Continue.
  • Use default SSID which is the name of your existing wireless network followed by _EXT.
  • Now select the same security and password of your existing network.
  • On device to extender page, you will get informed that the wifi settings for your EXT is changed and need to connect to your existing network before going for next tab “Continue”.
  • Once you have connected your wifi devices to the new network then click on Finish tab to complete the installation process. Now your extender setup is done and you can move your netgear ex2700 wifi range extender to any preferred location.

WPS Method for N300 WiFi Range Extender Model EX2700

When you want to connect your N300 WiFi Range Extender Model EX2700 with WPS Wi-Fi Protected Setup (WPS) then you need to follow the below given steps.

  • First, you need to press the WPS button on the side panel of your netgear extender.
  • In next two minutes, you need to press the WPS button on your router.
  • When your extender connects to existing WiFi network, the WPS LED on the extender lights turns solid green. If your wifi Router LED does not light, try again.
  • If it still does not blinking then check the installation.
  • Or unplug the extender and take it to a new location which is halfway between your router and the desired area where you need a good signal.
  • Now Plug the extender into an electrical socket and wait until the Power LED turns light green.
  • Then use the wifi Router Link LED on the front panel to help to select the best spot where we can get an optimal extender-to-router connection.
  • On your PC or WiFi device try to find and then connect to the new extended WiFi network. The netgear range extender can create a new extended wireless network which will display the name with _EXT at the end.

Now you need to test the extended WiFi range by moving your computer or WiFi device to the area with a poor router WiFi signal. Once done with place selection then leave your PC or WiFi device in the area with a weak router WiFi signal and return to the extender.

  • Check the Device connection LED on the extender:
  • If the device connection LED is solid green or amber in colour and your extended WiFi network reaches the area with a weak WiFi signal generated from the router then your network setup is complete.
  • If the Device connection  LED is blinking red then your extended WiFi network does not reach the area with a weak router WiFi signal that means  you need to move the PC or WiFi device nearer to the wireless range extender till the device LED turns solid in colour.